Utilities Artisan : Millwright/Electrician


Utilities Artisan : Millwright/Electrician (CCB220830-10) - CCBSA Horizontal
Closing Date2022/09/07
Reference NumberCCB220830-10
Job TitleUtilities Artisan : Millwright/Electrician
Job CategoryManufacturing
CompanyCoca-Cola Beverages South Africa
Job TypePermanent
Location – CountrySouth Africa
Location – ProvinceFree State
Location – Town / CityBloemfontein
Job DescriptionCoca-Cola Beverages South Africa (CCBSA) has an exciting opportunity in our department. We are looking for talented individual with relevant skills and experience for a Utilities Artisan: Millwright/Electrician role, which is based in Bloemfontein. The successful candidate will report directly to the Plant Engineer. Key purpose to maintain (inspect and adjust) and repair line equipment proactively as per maintenance targets in order to continually improve line efficiency, to optimize equipment availability and to minimize losses and risk
Key Duties & ResponsibilitiesKey Output Planned Maintenance :
• Take part in maintenance planning meeting, contributing suggestions and clarifying work required.
• Carry out work during the planned maintenance window in accordance with the planned maintenance schedule issued by the planner.
• Where scheduled work cannot be completed, feed back to the Maintenance Planner for direction. This may involve\ rescheduling the work or prioritizing outstanding work.
• Assist fellow team members in the execution of their tasks in support of planned maintenance periods.
• Complete any administration and SAP tasks in support of planned maintenance.
• Partake in maintenance post mortems to feedback problems, opportunities and learning from maintenance activities. Routine Maintenance :
• Partake in cleaning, lubrication and inspection in accordance with the maintenance schedule issued by the Maintenance
• Planner.
• Carry out routine maintenance activities in accordance with the maintenance schedule.
• Where problems have been uncovered during routine maintenance, these must be resolved using the appropriate problem solving techniques. If required, additional resources may be called in to assist.
• Carry out condition monitoring activities where these have been allocated to the Technician in accordance with the CM schedule Running Repairs :
• On request, partake in carrying out running repairs on plant and equipment, or support the Shift Artisans in carrying out repairs.
• When carrying out repairs assess the problem and determine a course of action.
• Where required, specialist assistance may be called in. This may include internal resources such as Instrument Technicians, or external resources such as Contractors or Suppliers.
• Where repairs indicate that major work is required, such as re-wiring a motor, this must be transferred to the engineering workshop for attention.
• Verify that where running repairs have been carried out, this has addressed the problem.
• Complete the administration tasks relating to any running repairs that the Technician has carried out. This includes all SAP inputs.
• Where running repairs cannot be carried out, communicate this to the Maintenance Planner to ensure the work is planned into the next planned Window. Problem Solving :
• Where problems have occurred during routine activities, apply the correct problem solving approach to resolve.
• Where required, call in additional resources to assist in problem solving or escalate to the Engineering Controller for direction.
• Assist fellow team members to resolve problems on request.
• Take part in FFA’s on request. Housekeeping and Safety :
• Operate in a safe manner at all times, and identify and highlight unsafe work practices so that these may be corrected.
• Fully comply to all legal, NOSA, Environmental and other relevant legislation.
• Carry out work according to the work instructions and adhere to appropriate SAB policies and procedures.
• Carry out housekeeping tasks, and apply 5S principles during the execution of duties. General :
• Start up, run and maintain the following equipment:
• 11kV / 380V transformers and reticulation
• 7 and 40 bar air compressors and driers
• Steam Boilers
• Refrigeration plants
• Water treatment (Nano and RO)
• Pumps, gearboxes, filters
• When requested, to implement small capital projects
• Delegated and monitored work allocation
• Managed personal development and performance Key Attributes & Competencies Knowledge :
• Manufacturing processes & procedures
• SHE standards and regulations
• Quality specifications and requirements
• organization understanding
• Technical knowledge and principles Attributes:
• Conceptualization
• Calculations
• Organizing
• Insight
• Action planning
• Decisiveness
• Comparison
• Effort focusing
Skills, Experience & EducationQualifications & Experience :
• Recognized Trade Test qualifications in Millwright, Electrical and Mechanical with N3 or higher.
• 2+ years relevant technical experience in an FMCG environment.
GeneralThe advert has minimum requirements listed. Management reserves the right to use additional or relevant information as criteria for short-listing. Interested applicants, who meet the above employee specifications, should please apply.


Leave a Reply

Your email address will not be published. Required fields are marked *